Features:
1.Soft start function 0%–100% dimming range
2.Overvoltage protection Protected against overload and overheating
3.Suitable for 2-way switching
4.Zero noise and flicker-free dimming Neutral conductor not required
Dimming mode: Phase-cut
Input voltage: 220–240 V AC, 50 Hz
Output power: 0.5 to 200 VA (LED)
Dimensions: 80 ×80 × 45 mm (L × W × H)
Dimmer insert: 70 × 70 mm (W × H), Depth: 40 mm
Note: The maximum load per circuit is 150 watts or 10 lamps (whichever is lower). Not suitable for motors, fans, and toroidal transformers. Always ensure that the power is completely switched off during installation. If you have any doubts about the installation, please consult a qualified electrician. More than one dimmer cannot be connected in parallel or in series to control the same load from two different locations. Damage caused by the customer is not covered by the warranty: such as self-repairs, contact with water, damage due to misuse, modifications, or failure to follow the product manual.
Reviews
There are no reviews yet.